Where can I fly my drone in the UK and get £5,000,000 Public Liability Insurance cover? Welcome to Drone Scene!

Wondering where you can legally fly your drone? Looking for great places to fly? Looking for £5m Public Liability Insurance cover? Well look no further!

Welcome to Drone Scene, the place to find great drone flying locations in the UK, view images and videos posted by other pilots and share your flying locations in order to help other UK hobbyists find great locations where they can fly safely too.

Click on a marker pin to view details of that location. You can also add comments and discuss the location in our forum.

×You must login to see Airspace Restrictions, National Trust boundaries and other interactive map layers.

Beaulieu River added to Rivers and Canals in South East by Stomper on 07/02/2023

There's a small observation platform where the pin is, accessed by one of the loop paths of the Solent way foot path. The nearest parking is available at the Bucklers Hard area or Beaulieu village ( ~1.5 miles away ).

The river snakes its way past Bucklers Hard boat yard, museum and hotel on its way to the Solent, the Isle of Wight can be see in the distance.

There are just as good views and photo opportunities looking up the river towards Beaulieu

Land owner permission requirements unknown.

View and discuss this location in more detail on Grey Arrows.

Co-ordinates: 50.80626, -1.428896 • what3words: ///humble.airliners.eyelashes

The originator declared that this location was not inside a Flight Restriction Zone at the time of being flown on 06/02/2023. It remains the responsibility of any pilot to check for any changes before flying at the same location.

Where to fly your drone


Recently added locations

Kingsgate Bay Kent (By grandad1950)

I flew from the cliff tops as the beach is in the SSSI. Good coffee in the beach shack. Even on a sunny day it wasn't crowded, so a good spot to take the family.

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.3839, 1.441828 • what3words: ///spits.aside.nobody

Botany Bay Kent (By grandad1950)

A series of coves surrounded by white cliffs. Lots of room to fly especially at low tide, but not a lot of room in the car park

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.3919, 1.428545 • what3words: ///curl.played.stage

Viking Bay, Broadstairs, Kent (By RDDronesLtd2022)

No permissions are required to fly here. Ensure you have the correct licence for the drone you are flying and don't fly here during peak hours.
Beautiful location to fly during sunrise and sestet hours.

Land owner permission not required.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.35805, 1.443168 • what3words: ///riding.aside.salad

North Foreland Lighthouse (By RDDronesLtd2022)

I don't believe permission is required to fly your drone here. As long as you have got the correct drone licence for the drone type you fly then I don't believe you would have a problem.
There is plenty of parking spaces at the beach car park (Joss Bay) There is a large field adjacent to the Lighthouse where you can takeoff and land your drone safely.

Great location and even more stunning footage can be captured during sunrise and sunset.

Land owner permission not required.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.37488, 1.445292 • what3words: ///turned.mouth.shunts

Govan-Partick Bridge (By 1AlanM)

New Govan to Partick footbridge opened September 2024. On the Govan side you have Old Govan Parish Church, the Pearce Institute and Govan Cross. On the Partick side you have the Zaha Hadid designed Riverside Museum and the Glenlee.

Parking available on both sides of the river - chargeable on the Partick side, free on the Govan side.

TOAL from beside old Harland & Wolff slips.

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 55.86469, -4.309151 • what3words: ///paint.crowned.smoke

Drapers Windmill Margate (By grandad1950)

Built in 1845 this is a classic form of smock mill. TOAL a bit tricky as the mill is next to a school so weekend flight when school is shut is the best bet

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.37993, 1.393316 • what3words: ///played.stop.cakes

Coldbackie Beach, Sutherland, NC500 (By AlbionDrones)

Some of the best beaches and views in the world can be found in the far north of Scotland, along and near the Scottish North Coast 500 (NC500).

Coldbackie is a small beach, at the mouth of the Kyle of Tongue, sheltered behind the Ravvit Isles, and is found just before you arrive in Tongue from Bettyhill and Borgie. The beach has stunning white sands, edges with craggy rocks and is bathed in crystal clear turquoise waters, what is not to love!

Take a moment to stop if you can, the viewpoint layby is worth a few minutes - just to soak up the views - whatever the weather!

There are pylons in front of the layby, so take care of hitting the wires, and the path down to the beach is steep and slippery, so best only attempt if you have good mobility and decent footwear...

Land owner permission not required.

View and discuss this location on Grey Arrows.

Co-ordinates: 58.50934, -4.385841 • what3words: ///barn.rags.drooling

Claymills Victorian Pumping Station, Burton-Upon-Trent (By D0c.Col)

Claymills Pumping Station is a fascinating example of Victorian industrial engineering located in Burton-upon-Trent, Staffordshire. It was built to pump sewage from the town to the sewage farms in the countryside, serving an important role in the sanitation and public health of the area.
Claymills Pumping Station was constructed between 1885 and 1889 by the Burton-upon-Trent Corporation as part of a broader effort to improve sanitation. The town was experiencing rapid growth due to its brewing industry, which necessitated a modern sewage system to cope with increasing waste.
The station was designed by the civil engineer James Mansergh, who was known for his work on water and sewage projects. The station is a striking example of Victorian engineering, with impressive brickwork, tall chimneys, and large engine houses.
It was fully operational from 1889 until it was decommissioned in 1971. During this time, it played a crucial role in managing sewage and wastewater, preventing the contamination of the River Trent and maintaining public health.
After its closure, the station fell into disrepair, but thanks to the efforts of volunteers and the Claymills Pumping Engines Trust, it has been restored and is now a museum and working heritage site that is designated as Grade II* listed.
The pumping station is powered by four massive beam engines, built by Gimson and Company of Leicester. These engines are named “Victoria,” “Prince Consort,” “Queen Mary,” and “Marquis Wellington.” And they are each capable of pumping around 3 million gallons of sewage per day.
The 120 horsepower compound beam engines are so called as they use steam twice for greater efficiency. The steam first enters the high-pressure cylinder and then the low-pressure cylinder before being exhausted.
The engines have a stroke of 10 feet and a bore of 32 inches for the high-pressure cylinders and 54 inches for the low-pressure cylinders.
They were originally powered by five Lancashire boilers, which generated the steam needed to drive the beam engines. These boilers were fired with coal, which was delivered to the site by rail.
The beam engines in turn drove large reciprocating pumps, which moved the sewage through large cast-iron pipes. The pumps had double-acting pistons, meaning they could pump on both the forward and return stroke thus increasing efficiency.
In addition to the main beam engines, the site also housed several smaller steam engines for auxiliary tasks, including pumping clean water to the boilers and driving workshop machinery.
Claymills is one of the most complete surviving examples of a Victorian pumping station, with much of the original machinery still intact and operational. The site now functions as a museum, offering educational tours, events that showcase the engineering marvels of the Victorian era including steam days, where visitors can see the engines in action.
The site also has a collection of other historical machinery and tools used in maintaining the station.
Due to its well-preserved state, Claymills has been used as a filming location for various documentaries and historical films, offering a glimpse into the industrial past.
Claymills Pumping Station is not just an industrial relic but a living museum that continues to educate and inspire those interested in engineering, history, and the industrial revolution. Its preservation allows visitors to step back in time and witness the power and ingenuity of Victorian engineering firsthand.

Claymills Pumping Station is inside the Derby Aerodrome FRZ so you will have to get authorisation to fly. Best to apply via email at least 24 hrs in advance to [email protected], although they have given me authorisation over the phone on occasions. In the email you'll need to include the following details:

1. Provide a map with the intended area of flight circled ie on a google map, or similar.
2. Time and date of flight.
3. Flight Duration.
4. Your Op ID and Flyer ID (if applicable).
5. UAS Device(s) to be used.
6. Your Name!

You will also be asked to contact them on the intended day just before and after your flight on Tel: 01283 733803. Sounds a lot but it really is easy and I've never been refused yet.

There are plenty of places to park, depending on the day you visit and check before you go on their website (https://www.claymills.org.uk/) as the pumping station is not always open. Best time to go are on thier STEAM days, when 2 of their 4 beam engines are fully operational, usually in conjunction with many more steam powered engines and quirky devices!

Word of Warning, there is a trainline running adjacent to the Station along with a level crossing with barrier. Not an issue really but I'm a belt and braces sort of guy!

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 52.82966, -1.611278 • what3words: ///glue.hangs.windy

Margate Kent (By grandad1950)

Vast beach, harbour, art gallery, fishing boats. So much to see although the beach gets very crowded. Parking a bit of a pain so we went to the Morrisons car park, just 5 minute walk to the beach.

Land owner permission requirements unknown.

View and discuss this location on Grey Arrows.

Co-ordinates: 51.38977, 1.379932 • what3words: ///sake.wants.nasal

Achininver and Midfield Beaches, NC500 (By AlbionDrones)

Turning off from the NC500, and passing through Midtown, Talmine and Portvasgo, and then venturing further along a quiet singletrack road your exploration is rewarded with the stunning vistas of Achininver and Midfield Beaches!

Beautiful views, quiet solitude, amazing colours - almost tropical in hue - and crystal clear water offer solace for the soul!

Car park located at the viewpoint for 2 or 3 cars, but even on an August Bank Holiday weekend and a sunny day it was deserted...

Land owner permission not required.

View and discuss this location on Grey Arrows.

Co-ordinates: 58.55159, -4.45148 • what3words: ///renting.listen.conforms


Show All Locations

Service provided by